@@ -32,7 +32,7 @@ Hint 2: This repository will be updated throughout the course, so make sure to "
## Lab 1 (Schematics)
The main topic of this lab is to give you a good understanding on how to use the information in *datasheets* to draw components and connect them in the schematic view.
The main topic of this lab is to give you a good understanding on how to use the information in _datasheets_ to draw components and connect them in the schematic view.
## Task 1
...
...
@@ -203,6 +203,7 @@ It is very important that the pin numbering on your component is correct to the
- Repeat for the crystal and SWD connector.
- MCU = HousingsQFP:LQFP-6410x10mmPitch0.5mm.
- USBOTG = Connect:USBMini-B (or to your liking)
- For the PMW3389 we will make a custom footprint later, so leave this one unassigned for now.
- Don’t forget to save!
Hint: Check that the numbering of the pins are correct! Hint 2: When you are working with your project later, you will probably not find all footprints in the standard library. There are good tutorials on youtube on how to draw your ownfootprints.
