diff --git a/.gitignore b/.gitignore
index 757c3db0c133375da08eb4b55ed52d99584c371f..b10d2890d980c2fad5879727055509f323c920f6 100644
--- a/.gitignore
+++ b/.gitignore
@@ -10,6 +10,6 @@ klee-*
 tags
 docs
 .ropeproject
-.gdb_history
 code-samples
-klee_profiling.db
+*.db
+.gdb_history
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..f44d16248f97e54c63686fb8d2d901bfdba483db
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,235 @@
+
+PROJECT_NAME=klee
+TARGET=$(PROJECT_NAME).hex
+EXECUTABLE=$(PROJECT_NAME).elf
+EXECOBJ=$(PROJECT_NAME).o
+IROUT=$(PROJECT_NAME).bc
+
+ifeq "$(MAKECMDGOALS)" "gcc"
+# GCC
+CC=arm-none-eabi-gcc
+LD=arm-none-eabi-ld
+AR=arm-none-eabi-ar
+AS=arm-none-eabi-as
+CP=arm-none-eabi-objcopy
+OD=arm-none-eabi-objdump
+
+else
+# CLANG
+CC=clang 
+LD=llvm-link
+CC-native=arm-none-eabi-gcc
+#LD-native=arm-none-eabi-ld
+AR=llvm-ar
+AS=arm-none-eabi-as
+CP=arm-none-eabi-objcopy
+OD=arm-none-eabi-objdump
+
+endif
+
+BIN=$(CP) -O ihex
+
+# Debugging with OpenOCD
+GDB = arm-none-eabi-gdb
+OOCD = openocd
+# General case, but now we need specifics
+#OOCDFLAsyscalls = -f interface/stlink-v2-1.cfg -f board/stm32f7discovery.cfg
+#OOCDFLAGS = -f interface/stlink-v2-1.cfg -f ocd_stm32f4.cfg
+
+OOCDFLAGS = -f interface/stlink-v2-1.cfg -f stm32f4x.cfg
+
+#DEFS = -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DMANGUSTA_DISCOVERY -DUSE_USB_OTG_FS -DHSE_VALUE=8000000
+#DEFS = -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F40XX -DHSE_VALUE=8000000
+
+# STM32F4x7 custom
+#DEFS = -DUSE_STDPERIPH_DRIVER -DSTM32F40XX -DSTM32F4XX -DHSE_VALUE=16000000
+
+# STM32F401
+ifeq "$(MAKECMDGOALS)" "rel"
+DEFS = -DSTM32F40XX -DHSE_VALUE=8000000 -DTRACE -DOS_USE_TRACE_ITM
+else
+DEFS = -DSTM32F40XX -DHSE_VALUE=8000000 -DKLEE
+endif
+
+# Definitions
+#ifeq "$(MAKECMDGOALS)" "debug"
+#DEFS = -DnoUSE_STDPERIPH_DRIVER -DHSE_VALUE=8000000 -DOS_USE_TRACE_ITM -DDEBUG -DxOS_USE_SEMIHOSTING -DTRACE -DxOS_USE_TRACE_SEMIHOSTING_DEBUG -DSTM32F746xx
+#else
+#DEFS = -DnoUSE_STDPERIPH_DRIVER -DHSE_VALUE=8000000 -DxOS_USE_SEMIHOSTING -DxOS_USE_TRACE_SEMIHOSTING_DEBUG -DSTM32F746xx
+#endif
+
+# Optimize for size
+#OPTIMIZE       = -Os
+# No optimization at all
+OPTIMIZE       = -O0
+
+#INCSEARCH = include
+#SRCIGNORE =! -iname 'tiny_printf.c'
+#INCLUDES := $(shell find $(INCSEARCH) -name '*.h' -exec dirname {} \; | uniq)
+INCLUDES = -I"include" \
+		   -I"system" \
+		   -I"system/include/cmsis" \
+		   -I"system/include/cmsis/stm32f4-hal"
+		   #-I"Libraries/stm32f4-hal" \
+		   #-I"Libraries/STM32F4xx_StdPeriph_Driver/inc"\
+		   #-I"Libraries/CMSIS/Include"\
+		   #-I"Libraries/Device/STM32F4xx/Include"
+
+MCU = cortex-m4
+
+ifeq "$(MAKECMDGOALS)" "gcc"
+# GCC
+
+include Makefile_gcc
+
+# End of the GCC block
+else
+# Start of the CLANG block
+
+# CLANG
+CLANGMCFLAGS =-target arm-none-eabi -fno-integrated-as
+# MCU Specific flags
+MCFLAGS = -mcpu=$(MCU) -mlittle-endian -mthumb -ffreestanding \
+	-fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fshort-enums \
+	-g3 -std=gnu11 -Wall -Wextra 
+
+# For creating object file from LLVM IR
+LLCFLAGS = -mtriple=arm-none-eabi -march=thumb -mcpu=$(MCU) -filetype=obj -float-abi=hard
+
+# Assembler flags
+ASFLAGS = -mcpu=$(MCU) -mlittle-endian -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+
+
+# Linking options with -nostartfiles
+#LDFLAGS = -T ldscripts/stm32f4_flash.ld  -nostdlib -nostartfiles -nostartupfiles  -gc-sections -print-gc-sections  -Map objects/$(EXECUTABLE).map
+LDFLAGS = --specs=nosys.specs  -Wl,-T "ldscripts/flash.ld" -nostartfiles -Wl,-nostdlib,-print-gc-sections -Wl,-Map,objects/$(EXECUTABLE).map
+# Not used:
+#--specs=nano.specs --specs=nosys.specs  -lc -lnosys 
+
+CLANGLDFLAGS = -flto -target arm-none-eabi -mfloat-abi=hard # -save-temps=obj
+#or if you want .bc in objects -save-temps=obj
+
+# Build the compile command
+CFLAGS	= $(CLANGMCFLAGS) $(MCFLAGS)  $(OPTIMIZE)  $(DEFS)
+
+
+# Recursively add all .c files
+#SRC := $(shell find $(SOURCEDIR) -name '*.c')
+
+SRCSEARCH = src
+SRCIGNORE =! -iname 'tiny_printf.c' ! -iname 'fsdata.c' ! -iname 'stm32f4xx_spi.c' ! -iname 'stm32f4xx_iwdg.c'
+# Include the heap_4 RTOS_heap while excluding the other *_{1-5}
+# Everything in src will be compiled
+SRC := $(shell find $(SRCSEARCH) -name '*.c' $(SRCIGNORE) )
+
+# Create dependency folders for object files
+SRCDIRS := $(shell find $(SRCSEARCH) -name '*.c' $(SRCIGNORE) )
+#SRCDIRS += $(shell find libs/dw1000/src -maxdepth 1 -name '*.c' -exec dirname {} \; | uniq)
+SRCDIRS += startup
+
+# Startup files
+#STARTUP = startup/startup_stm32f40xx.s
+#STARTUP = startup/startup_stm32f407xx.s
+STARTUP = startup/startup_stm32f4.c
+
+# Assembler file to facilitate printing of stack in case of hardfault
+#HARDFAULT = startup/hardfault.s
+
+# Create folder for storing all object files
+OBJDIR = objects
+
+OBJ    := $(patsubst %.c,$(OBJDIR)/%.bc,$(SRC))
+#OBJASM := $(patsubst %.s,$(OBJDIR)/%.o,$(HARDFAULT))
+OBJSTART := $(patsubst %.c,$(OBJDIR)/%.o,$(STARTUP))
+
+DEPS    := $(patsubst %.bc,%.d,$(OBJ))
+DEPS    += $(patsubst %.o,%.d,$(OBJASM))
+
+DEPENDS  = -MT $@ -MD -MP -MF $(subst .o,.d,$@)
+SHELL    = /bin/bash
+
+.PHONY: all clean distclean
+
+
+debugbuild: buildrepo $(EXECUTABLE)
+
+all: buildrepo $(EXECUTABLE)
+
+rel: buildrepo $(EXECUTABLE)
+
+# Link native code into final executable
+#$(EXECUTABLE): $(EXECOBJ) $(OBJASM)
+ifeq "$(MAKECMDGOALS)" "rel"
+$(EXECUTABLE): $(EXECOBJ) $(OBJSTART)
+	$(CC-native) $(INCLUDES) $(MCFLAGS) $(LDFLAGS) $^ -o $@
+else
+$(EXECUTABLE): $(EXECOBJ)
+	echo "Not doing final ARM linking."
+endif
+
+# Specially compile the startup code with GCC since CLANG does not understand linker scripts
+$(OBJSTART):
+	$(CC-native) $(MCFLAGS) $(OPTIMIZE) $(DEFS) $(DEPENDS) -c $(STARTUP) $^ -o $@ $(INCLUDES) 
+
+# Link LLVM-code into native code
+$(EXECOBJ): $(IROUT)
+	llc $(LLCFLAGS) $(IROUT) -o $@
+
+$(IROUT): $(OBJ)
+	llvm-link $^ -o $@
+
+# Source files "-c" is to not link
+$(OBJDIR)/%.bc: %.c
+	$(CC) $(CFLAGS) -c $(CLANGLDFLAGS) $(DEPENDS) $< -o $@ $(INCLUDES)
+
+# Assembler files "-c" is to not link
+# Clang assembler files
+#$(OBJDIR)/%.o: %.s
+#	$(CC) $(CLANGMCFLAGS) -c $(CLANGLDFLAGS) $< -o $@ $(INCLUDES)
+
+$(OBJDIR)/%.o: %.s
+	$(CC-native) $(MCFLAGS) $(OPTIMIZE) $(DEFS) $(DEPENDS) $(STARTUP) $< -o $@ $(INCLUDES) 
+
+# End of the CLANG block
+endif
+
+clean:
+	$(RM) -r $(OBJDIR) $(EXECOBJ) $(IR) $(IROUT)
+
+cleanall:
+	$(RM) -r $(OBJDIR) $(EXECOBJ) $(IR) $(IROUT) klee-last klee-out* $(EXECUTABLE)
+
+distclean: clean
+	$(RM) $(EXECUTABLE)
+
+buildrepo:
+	@$(call make-repo)
+
+flash: $(EXECUTABLE)
+	$(OOCD) $(OOCDFLAGS) \
+	  -c "init" -c "targets" -c "reset halt" \
+	  -c "flash write_image erase $<" -c "verify_image $<" \
+	  -c "reset run" -c "shutdown"
+
+debug: $(EXECUTABLE)
+	$(GDB) -n -iex 'target extended | $(OOCD) $(OOCDFLAGS) -c "gdb_port pipe"' \
+	-iex 'mon halt' $<
+
+klee: buildrepo $(EXECUTABLE)
+	klee -emit-all-errors $(IROUT)
+
+define make-repo
+   for dir in $(SRCDIRS); \
+   do \
+    mkdir -p $(OBJDIR)/$$dir; \
+   done
+endef
+
+ifneq "$(MAKECMDGOALS)" "distclean"
+ifneq "$(MAKECMDGOALS)" "clean"
+-include $(DEPS)
+endif
+endif
+
+cleanold:
+	rm -f Startup.lst  $(TARGET)  $(TARGET).lst $(OBJ) $(AUTOGEN)  $(TARGET).out  $(TARGET).hex  $(TARGET).map  $(TARGET).dmp  $(TARGET).elf
diff --git a/doxygen.conf b/doxygen.conf
new file mode 100644
index 0000000000000000000000000000000000000000..b3b1e144313aadbe5a46011a292ed1ea56c615fa
--- /dev/null
+++ b/doxygen.conf
@@ -0,0 +1,2410 @@
+# Doxyfile 1.8.11
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "KLEE on ARM"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          = "Scheduling analysis with the help of symbolic execution"
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = docs
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = YES
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# If one adds a struct or class to a group and this option is enabled, then also
+# any nested class or struct is added to the same group. By default this option
+# is disabled and one has to add nested compounds explicitly via \ingroup.
+# The default value is: NO.
+
+GROUP_NESTED_COMPOUNDS = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = NO
+
+# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
+# a warning is encountered.
+# The default value is: NO.
+
+WARN_AS_ERROR          = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  =
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# read by doxygen.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl,
+# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js.
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = */old-code/*
+EXCLUDE_PATTERNS       += */.git/*
+EXCLUDE_PATTERNS       += */cubemx/*
+EXCLUDE_PATTERNS       += */cleanflight/*
+EXCLUDE_PATTERNS       += */libs/*
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
+
+FILTER_PATTERNS        = 
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE = README.md
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to YES can help to show when doxygen was last run and thus if the
+# documentation is up to date.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = YES
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. The package can be specified just
+# by its name or with the correct syntax as to be used with the LaTeX
+# \usepackage command. To get the times font for instance you can specify :
+# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
+# To use the option intlimits with the amsmath package you can specify:
+# EXTRA_PACKAGES=[intlimits]{amsmath}
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_TIMESTAMP        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = YES
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command. Disabling a call graph can be
+# accomplished by means of the command \hidecallgraph.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = YES 
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command. Disabling a caller graph can be
+# accomplished by means of the command \hidecallergraph.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. For an explanation of the image formats see the section
+# output formats in the documentation of the dot tool (Graphviz (see:
+# http://www.graphviz.org/)).
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# png:gdiplus:gdiplus.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/gdb.dev b/gdb.dev
new file mode 100644
index 0000000000000000000000000000000000000000..a8e1507d37a4eff8cbd45442b27c4b73849e00ed
--- /dev/null
+++ b/gdb.dev
@@ -0,0 +1,6 @@
+file target/thumbv7em-none-eabi/debug/emb1
+
+target remote : 3333
+monitor reset init
+load
+monitor reset init
diff --git a/gdb.rel b/gdb.rel
new file mode 100644
index 0000000000000000000000000000000000000000..f23fd16074e259b8406d3a3f4c9e403d341f9149
--- /dev/null
+++ b/gdb.rel
@@ -0,0 +1,6 @@
+file target/thumbv7em-none-eabi/release/emb1
+
+target remote : 3333
+monitor reset init
+load
+monitor reset init
diff --git a/klee_stm_gdb.py b/klee_stm_gdb.py
new file mode 100644
index 0000000000000000000000000000000000000000..8ff6e288c41cf5666ee70fa56fe31304b6e74a7f
--- /dev/null
+++ b/klee_stm_gdb.py
@@ -0,0 +1,298 @@
+import gdb
+import os
+import sys
+import struct
+import sqlite3
+
+# Should ideally properly just import from ktest-tool
+# from .ktesttool import KTest
+
+version_no = 3
+
+file_list = []
+file_index_current = 0
+object_index_current = 0
+
+""" Max number of events guard """
+object_index_max = 100
+
+database_name = "klee_profiling"
+
+""" Check if a database exists, otherwise create one """
+
+if os.path.isfile("%s%s" % (database_name, ".db")):
+    os.rename("%s%s" % (database_name, ".db"),
+              "%s%s" % (database_name, "_old.db"))
+    # conn = sqlite3.connect(database_name)
+    # cur = conn.cursor()
+    # print("Opened already created database")
+conn = sqlite3.connect("%s%s" % (database_name, ".db"))
+cur = conn.cursor()
+cur.execute('''CREATE TABLE IF NOT EXISTS events
+    (ID INTEGER PRIMARY KEY AUTOINCREMENT,
+    FILE           TEXT     NOT NULL,
+    TIME           INT      NOT NULL,
+    RESOURCE       TEXT     NOT NULL,
+    ACTION         TEXT);''')
+
+
+class KTestError(Exception):
+    pass
+
+
+class KTest:
+
+    @staticmethod
+    def fromfile(path):
+        if not os.path.exists(path):
+            print("ERROR: file %s not found" % (path))
+            sys.exit(1)
+
+        f = open(path, 'rb')
+        hdr = f.read(5)
+        if len(hdr) != 5 or (hdr != b'KTEST' and hdr != b"BOUT\n"):
+            raise KTestError('unrecognized file')
+        version, = struct.unpack('>i', f.read(4))
+        if version > version_no:
+            raise KTestError('unrecognized version')
+        numArgs, = struct.unpack('>i', f.read(4))
+        args = []
+        for i in range(numArgs):
+            size, = struct.unpack('>i', f.read(4))
+            args.append(str(f.read(size).decode(encoding='ascii')))
+
+        if version >= 2:
+            symArgvs, = struct.unpack('>i', f.read(4))
+            symArgvLen, = struct.unpack('>i', f.read(4))
+        else:
+            symArgvs = 0
+            symArgvLen = 0
+
+        numObjects, = struct.unpack('>i', f.read(4))
+        objects = []
+        for i in range(numObjects):
+            size, = struct.unpack('>i', f.read(4))
+            name = f.read(size)
+            size, = struct.unpack('>i', f.read(4))
+            bytes = f.read(size)
+            objects.append((name, bytes))
+
+        # Create an instance
+        b = KTest(version, args, symArgvs, symArgvLen, objects)
+        # Augment with extra filename field
+        b.filename = path
+        return b
+
+    def __init__(self, version, args, symArgvs, symArgvLen, objects):
+        self.version = version
+        self.symArgvs = symArgvs
+        self.symArgvLen = symArgvLen
+        self.args = args
+        self.objects = objects
+
+        # add a field that represents the name of the program used to
+        # generate this .ktest file:
+        program_full_path = self.args[0]
+        program_name = os.path.basename(program_full_path)
+        # sometimes program names end in .bc, so strip them
+        if program_name.endswith('.bc'):
+            program_name = program_name[:-3]
+        self.programName = program_name
+
+
+class MainBP(gdb.Breakpoint):
+
+    def stop(self):
+        # print("##### breakpoint")
+        global file_index_current
+        gdb.events.stop.connect(stop_event)
+        if self.location == "main":
+            # gdb.write("Breakpoint in main()\n")
+            gdb.prompt_hook = prompt
+            gdb.post_event(posted_event_main)
+
+        elif self.location == "finish_execution":
+            # gdb.write("Breakpoint in finish_execution\n")
+            # gdb.write("Stopped before the main loop\n")
+            """ Save the execution time and
+                reload back to the main function.
+            """
+            gdb.prompt_hook = prompt
+            gdb.post_event(posted_event_finish_execution)
+
+        """ Needed to actually stop after the breakpoint """
+        return True
+
+
+# Subscribing to the stop events
+def stop_event(evt):
+    # print("#### stop event")
+    # print("evt %r" % evt)
+    gdb.events.stop.disconnect(stop_event)
+
+
+# Hooking the prompt:
+def prompt(current):
+    # print("current %r" % current)
+    # print("#### prompt")
+    gdb.prompt_hook = current
+
+
+# Posting events (which seem to work well when height=0)
+# def posted_event():
+    # print("#### posted event")
+    # gdb.execute("
+
+
+def posted_event_main():
+    """ Called when the breakpoint at main() is hit """
+    # print("# main BP")
+    global file_index_current
+    ktest_setdata(file_index_current)
+    gdb.execute("continue")
+
+
+def posted_event_finish_execution():
+    """ Called when the breakpoint at finish_execution() is hit """
+    global file_list
+    global file_index_current
+    global object_index_current
+    global object_index_max
+
+    # gdb.execute("print eventlist")
+
+    # print("object_current: %r " % object_index_current)
+    print("object_max: %r " % object_index_max)
+
+    while object_index_current < object_index_max:
+        """ Collect all data for the database """
+        event_time = gdb.parse_and_eval("eventlist[" +
+                                        str(object_index_current) +
+                                        "].time")
+
+        event_resource = gdb.parse_and_eval("eventlist[" +
+                                            str(object_index_current) +
+                                            "].elem")
+
+        event_action = gdb.parse_and_eval("eventlist[" +
+                                          str(object_index_current) +
+                                          "].action")
+
+        """
+        print("file: %r " % str(file_list[file_index_current]))
+        print("time: %r " % int(event_time))
+        print("resource:  %r" % str(event_resource))
+        print("action:  %r" % str(event_action))
+        """
+
+        event = []
+
+        event.append(str(file_list[file_index_current]))
+        event.append(int(event_time))
+        event.append(str(event_resource))
+        event.append(str(event_action))
+
+        print("Event: %r " % event)
+
+        try:
+            cur = conn.cursor()
+
+            cur.execute('INSERT INTO events(FILE, TIME, RESOURCE, ACTION)\
+                        VALUES (?,?,?,?)', event)
+
+        except sqlite3.Error as e:
+            print("An error occurred:", e.args[0])
+
+        object_index_current += 1
+        """ If this was the END of execution go for next file """
+        if str(event_action) == 'E':
+            """ All events covered, break out from loop """
+            break
+
+    """ Reset object counter for next file """
+    file_index_current += 1
+    object_index_current = 0
+
+    """ All done, commit to database and tidy after ourselves """
+    if len(file_list) == file_index_current:
+        print("Committing to database")
+        conn.commit()
+
+        conn.close()
+        gdb.execute("quit")
+    else:
+        gdb.execute("run")
+
+
+def trimZeros(str):
+    for i in range(len(str))[::-1]:
+        if str[i] != '\x00':
+            return str[:i + 1]
+
+    return ''
+
+
+def ktest_setdata(file_index):
+    """
+    Substitute every variable found in ktest-file
+    """
+    global file_list
+    b = KTest.fromfile(file_list[file_index])
+    # print('ktest filename : %r' % filename)
+    gdb.write('ktest file : %r \n' % file_list[file_index])
+    # print('args       : %r' % b.args)
+    # print('num objects: %r' % len(b.objects))
+    for i, (name, data) in enumerate(b.objects):
+        str = trimZeros(data)
+        # print('object %4d: name: %r' % (i, name))
+        # print('object %4d: size: %r' % (i, len(data)))
+        # if opts.writeInts and len(data) == 4:
+        obj_data = struct.unpack('i', str)[0]
+        """
+        print('object %4d: data: %r' %
+                (i, obj_data))
+        """
+        # gdb.execute('whatis %r' % name.decode('UTF-8'))
+        # gdb.execute('whatis %r' % obj_data)
+        gdb.execute('set variable %s = %r' %
+                    (name.decode('UTF-8'), obj_data))
+        # gdb.write('Variable %s is:' % name.decode('UTF-8'))
+        # gdb.execute('print %s' % name.decode('UTF-8'))
+        # else:
+        # print('object %4d: data: %r' % (i, str))
+
+
+def ktest_iterate():
+    """ Iterate over all files ending with ktest in klee-last folder """
+
+    directory = "klee-last"
+    for filename in os.listdir(directory):
+        if filename.endswith(".ktest"):
+            file_list.append(os.path.join(directory, filename))
+        else:
+            continue
+
+    file_list.sort()
+    return file_list
+
+
+""" Break at main to set variable values """
+# AddBreakpoint("main")
+MainBP("main")
+
+""" Also break at the main-loop """
+# AddBreakpoint("finish_execution")
+MainBP("finish_execution")
+MainBP("terminate_execution")
+
+"""Used for making it scriptable"""
+gdb.execute("set confirm off")
+gdb.execute("set pagination off")
+gdb.execute("set verbose off")
+
+""" Save all ktest files into an array """
+file_list = ktest_iterate()
+print(file_list)
+
+""" Run until the main() breakpoint """
+gdb.execute("c")
diff --git a/profiling_db_parser.py b/profiling_db_parser.py
new file mode 100644
index 0000000000000000000000000000000000000000..eac5dc971b3e2c39b77ee5ba8168eda52ed01604
--- /dev/null
+++ b/profiling_db_parser.py
@@ -0,0 +1,183 @@
+import os
+import sys
+import struct
+import sqlite3
+import argparse
+
+version_no = 3
+
+file_list = []
+file_index_current = 0
+object_index_current = 0
+
+database_name = "klee_profiling.db"
+
+""" Check if a database exists, otherwise create one """
+
+if os.path.isfile(database_name):
+    conn = sqlite3.connect(database_name)
+    c = conn.cursor()
+    print("Opened already created database")
+else:
+    print("No file named %s exists in current folder!")
+    exit()
+
+
+class KTestError(Exception):
+    pass
+
+
+class KTest:
+
+    @staticmethod
+    def fromfile(path):
+        if not os.path.exists(path):
+            print("ERROR: file %s not found" % (path))
+            sys.exit(1)
+
+        f = open(path, 'rb')
+        hdr = f.read(5)
+        if len(hdr) != 5 or (hdr != b'KTEST' and hdr != b"BOUT\n"):
+            raise KTestError('unrecognized file')
+        version, = struct.unpack('>i', f.read(4))
+        if version > version_no:
+            raise KTestError('unrecognized version')
+        numArgs, = struct.unpack('>i', f.read(4))
+        args = []
+        for i in range(numArgs):
+            size, = struct.unpack('>i', f.read(4))
+            args.append(str(f.read(size).decode(encoding='ascii')))
+
+        if version >= 2:
+            symArgvs, = struct.unpack('>i', f.read(4))
+            symArgvLen, = struct.unpack('>i', f.read(4))
+        else:
+            symArgvs = 0
+            symArgvLen = 0
+
+        numObjects, = struct.unpack('>i', f.read(4))
+        objects = []
+        for i in range(numObjects):
+            size, = struct.unpack('>i', f.read(4))
+            name = f.read(size)
+            size, = struct.unpack('>i', f.read(4))
+            bytes = f.read(size)
+            objects.append((name, bytes))
+
+        # Create an instance
+        b = KTest(version, args, symArgvs, symArgvLen, objects)
+        # Augment with extra filename field
+        b.filename = path
+        return b
+
+    def __init__(self, version, args, symArgvs, symArgvLen, objects):
+        self.version = version
+        self.symArgvs = symArgvs
+        self.symArgvLen = symArgvLen
+        self.args = args
+        self.objects = objects
+
+        # add a field that represents the name of the program used to
+        # generate this .ktest file:
+        program_full_path = self.args[0]
+        program_name = os.path.basename(program_full_path)
+        # sometimes program names end in .bc, so strip them
+        if program_name.endswith('.bc'):
+            program_name = program_name[:-3]
+        self.programName = program_name
+
+
+def trimZeros(str):
+    for i in range(len(str))[::-1]:
+        if str[i] != '\x00':
+            return str[:i + 1]
+
+    return ''
+
+
+def ktest_setdata(filename):
+    """
+    Substitute every variable found in ktest-file
+    """
+    global file_list
+    b = KTest.fromfile(filename)
+    # print('ktest filename : %r' % filename)
+    # print('args       : %r' % b.args)
+    print('num objects: %r' % len(b.objects))
+    for i, (name, data) in enumerate(b.objects):
+        str = trimZeros(data)
+        print('object %4d: name: %r' % (i, name))
+        print('object %4d: size: %r' % (i, len(data)))
+        # if opts.writeInts and len(data) == 4:
+        obj_data = struct.unpack('i', str)[0]
+        print('object %4d: data: %r' %
+              (i, obj_data))
+        # else:
+        # print('object %4d: data: %r' % (i, str))
+
+
+def ktest_iterate():
+    """ Iterate over all files ending with ktest in klee-last folder """
+
+    directory = "klee-last"
+    for filename in os.listdir(directory):
+        if filename.endswith(".ktest"):
+            file_list.append(os.path.join(directory, filename))
+        else:
+            continue
+
+    file_list.sort()
+    return file_list
+
+
+def print_db_ktest():
+    global file_list
+
+    """ E - S For total task time
+        R - L For total lock time
+    """
+    for filename in file_list:
+
+        print("Testcase: %s" % filename)
+        ktest_setdata(filename)
+        """ Return all resources/tasks """
+        c.execute('SELECT DISTINCT resource FROM events WHERE (file=?)',
+                  (filename,))
+        resources = c.fetchall()
+
+        """ Go through the unique list of resources
+
+            If they are called multiple times this is handled later
+        """
+        for res in resources:
+            c.execute('''SELECT time FROM events WHERE
+                      (file=? AND resource=?)''',
+                      (str(filename), str(res[0]),))
+            rows = c.fetchall()
+
+            # Check if resource has been claimed more than than once
+            claims = len(rows)
+
+            # 2 is the expected value for 1 lock and 1 release
+            x = 0
+            while x < claims:
+                print("Number of instructions taken for %s: %d"
+                      % (res[0], rows[x+1][0] - rows[x][0]))
+                x += 2
+
+        print("\n")
+
+
+if __name__ == '__main__':
+
+    parser = argparse.ArgumentParser(description=
+                                     'Parse and print a profiling database.')
+    parser.add_argument('filename', metavar='filename', type=open,
+                        help='The database to be parsed')
+
+    args = parser.parse_args()
+
+    """ Save all ktest files into an array """
+    file_list = ktest_iterate()
+
+    print_db_ktest()
diff --git a/st_nucleo_f4_itm.cfg b/st_nucleo_f4_itm.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..5cbb8002d9d956a031cb9335cd7f59954fc7eaca
--- /dev/null
+++ b/st_nucleo_f4_itm.cfg
@@ -0,0 +1,26 @@
+# This is for all ST NUCLEO with any STM32F4. Known boards at the moment:
+# STM32F401RET6
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260000
+# STM32F411RET6
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260320
+
+source [find interface/stlink-v2-1.cfg]
+
+transport select hla_swd
+
+# source [find target/stm32f4x.cfg]
+# local file
+source [find ./stm32f4x.cfg]
+# reset-init will set the processor to 64MHz, jtag to 4000kHz
+
+# itm ports on seems not necessary, port 0 is enabled by default
+# itm ports on
+
+reset_config srst_only
+
+# Henriks f7 setting
+# tpiu config internal swo.log uart off 216000000 1800000
+# info: http://openocd.org/doc/html/Architecture-and-Core-Commands.html
+tpiu config internal swo.log uart off 64000000
+# creates a swo.log in the current directory
+# use tail -f swo.log to continously monitor the output
diff --git a/st_nucleo_f4_itm_vm.cfg b/st_nucleo_f4_itm_vm.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..c3988b3aef4e3d197f7d65892e2d0a9055393f19
--- /dev/null
+++ b/st_nucleo_f4_itm_vm.cfg
@@ -0,0 +1,26 @@
+# This is for all ST NUCLEO with any STM32F4. Known boards at the moment:
+# STM32F401RET6
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260000
+# STM32F411RET6
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260320
+
+source [find interface/stlink-v2-1.cfg]
+
+transport select hla_swd
+
+# source [find target/stm32f4x.cfg]
+# local file
+source [find ./stm32f4x.cfg]
+# reset-init will set the processor to 64MHz, jtag to 4000kHz
+
+# itm ports on seems not necessary, port 0 is enabled by default
+# itm ports on
+
+reset_config srst_only
+
+# Henriks f7 setting
+# tpiu config internal swo.log uart off 216000000 1800000
+# info: http://openocd.org/doc/html/Architecture-and-Core-Commands.html
+tpiu config internal /Users/pln/shared/swo.log  uart off 64000000
+# creates a swo.log in the current directory
+# use tail -f swo.log to continously monitor the output
diff --git a/startup/startup_stm32f4.c b/startup/startup_stm32f4.c
new file mode 100644
index 0000000000000000000000000000000000000000..6ad1d7f7e30daef606baa8bc0ebf8b24222a6e78
--- /dev/null
+++ b/startup/startup_stm32f4.c
@@ -0,0 +1,132 @@
+/*
+ * =====================================================================================
+ *
+ *       Filename:  startup_stm32f4.c
+ *
+ *    Description:  Startup code for STM32F4 MCU
+ *                  Based on http://electronics.stackexchange.com/questions/224618/minimal-code-required-to-startup-a-stm32f4
+ *
+ *        Version:  1.0
+ *        Created:  12/11/2016 02:54:57 PM
+ *       Revision:  none
+ *       Compiler:  gcc
+ *
+ *   Organization:
+ *
+ * =====================================================================================
+ */
+
+#include "stdint.h"
+#include "stm32f401xe.h"
+/*#include "stm32f4xx.h"*/
+/*#include "stm32f4xx_hal_gpio.h"*/
+/*#include "stm32f4xx_hal_flash.h"*/
+
+
+/** Main program entry point. */
+extern int main(void);
+
+/** Exit system call. */
+extern void _exit(int code);
+
+extern unsigned int __textdata__;
+extern unsigned int __data_start__;
+extern unsigned int __data_end__;
+extern unsigned int __bss_start__;
+extern unsigned int __bss_end__;
+
+/** Initializes the data section. */
+static void __attribute__((always_inline)) __initialize_data (unsigned int* from,
+        unsigned int* region_begin, unsigned int* region_end);
+
+/** Initializes the BSS section. */
+static void __attribute__((always_inline)) __initialize_bss (unsigned int* region_begin,
+        unsigned int* region_end);
+
+/** Start-up code. */
+void __attribute__ ((section(".after_vectors"), noreturn, used)) _start(void);
+
+
+void _start (void)
+{
+    //Before switching on the main oscillator and the PLL,
+    //and getting to higher and dangerous frequencies,
+    //configuration of the flash controller is necessary.
+
+    //Enable the flash prefetch buffer. Can be achieved when CCLK
+    //is lower than 24MHz.
+    /*FLASH_PrefetchBufferCmd(1);*/
+    /* Enable or disable the Prefetch Buffer */
+    /*if(NewState != DISABLE)*/
+    /*{*/
+    FLASH->ACR |= FLASH_ACR_PRFTEN;
+    /*}*/
+    /*else*/
+    /*{*/
+    /*FLASH->ACR &= (~FLASH_ACR_PRFTEN);*/
+    /*}*/
+
+    //Set latency to 2 clock cycles. Necessary for setting the clock
+    //to the maximum 72MHz.
+    /*FLASH_SetLatency(2);*/
+
+    /* Perform Byte access to FLASH_ACR[8:0] to set the Latency value */
+    *(__IO uint8_t *)FLASH_ACR_BYTE0_ADDRESS = (uint8_t)2;
+
+
+    // Initialize hardware right after configuring flash, to switch
+    //clock to higher frequency and have the rest of the
+    //initializations run faster.
+    //
+    //Testing to let OpenOCD set these instead
+    /*SystemInit();*/
+
+
+    // Copy the DATA segment from Flash to RAM (inlined).
+    __initialize_data(&__textdata__, &__data_start__, &__data_end__);
+
+    // Zero fill the BSS section (inlined).
+    __initialize_bss(&__bss_start__, &__bss_end__);
+
+
+    //Core is running normally, RAM and FLASH are initialized
+    //properly, now the system must be fully functional.
+
+    //Update the SystemCoreClock variable.
+    /*SystemCoreClockUpdate();*/
+
+
+    // Call the main entry point, and save the exit code.
+    int code = main();
+
+
+    //Main should never return. If it does, let the system exit gracefully.
+    _exit (code);
+
+    // Should never reach this, _exit() should have already
+    // performed a reset.
+    while(1);
+}
+
+static inline void __initialize_data (unsigned int* from, unsigned int* region_begin,
+                                      unsigned int* region_end)
+{
+    // Iterate and copy word by word.
+    // It is assumed that the pointers are word aligned.
+    unsigned int *p = region_begin;
+    while (p < region_end)
+    {
+        *p++ = *from++;
+    }
+}
+
+static inline void __initialize_bss (unsigned int* region_begin, unsigned int* region_end)
+{
+    // Iterate and clear word by word.
+    // It is assumed that the pointers are word aligned.
+    unsigned int *p = region_begin;
+    while (p < region_end)
+    {
+        *p++ = 0;
+    }
+}
diff --git a/stm32f4x.cfg b/stm32f4x.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..3da4e7a0c8690ae8ff13113191ba2856e8cdfe27
--- /dev/null
+++ b/stm32f4x.cfg
@@ -0,0 +1,137 @@
+# script for stm32f4x family
+
+#
+# stm32 devices support both JTAG and SWD transports.
+#
+source [find target/swj-dp.tcl]
+source [find mem_helper.tcl]
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME stm32f4x
+}
+
+set _ENDIAN little
+
+# Work-area is a space in RAM used for flash programming
+# By default use 32kB (Available RAM in smallest device STM32F410)
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x8000
+}
+
+#jtag scan chain
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   if { [using_jtag] } {
+      # See STM Document RM0090
+      # Section 38.6.3 - corresponds to Cortex-M4 r0p1
+      set _CPUTAPID 0x4ba00477
+   } {
+      set _CPUTAPID 0x2ba01477
+   }
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+if { [info exists BSTAPID] } {
+   set _BSTAPID $BSTAPID
+} else {
+  # See STM Document RM0090
+  # Section 38.6.2
+  # STM32F405xx/07xx and STM32F415xx/17xx
+  set _BSTAPID1 0x06413041
+  # STM32F42xxx and STM32F43xxx
+  set _BSTAPID2 0x06419041
+  # See STM Document RM0368 (Rev. 3)
+  # STM32F401B/C
+  set _BSTAPID3 0x06423041
+  # STM32F401D/E
+  set _BSTAPID4 0x06433041
+  # See STM Document RM0383 (Rev 2)
+  # STM32F411
+  set _BSTAPID5 0x06431041
+  # See STM Document RM0386
+  # STM32F469
+  set _BSTAPID6 0x06434041
+  # See STM Document RM0401
+  # STM32F410
+  set _BSTAPID7 0x06458041
+  # STM32F412
+  set _BSTAPID8 0x06441041
+}
+
+if {[using_jtag]} {
+ swj_newdap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \
+     -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \
+     -expected-id $_BSTAPID4 -expected-id $_BSTAPID5 \
+     -expected-id $_BSTAPID6 -expected-id $_BSTAPID7 \
+     -expected-id $_BSTAPID8
+}
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
+
+# JTAG speed should be <= F_CPU/6. F_CPU after reset is 16MHz, so use F_JTAG = 2MHz
+#
+# Since we may be running of an RC oscilator, we crank down the speed a
+# bit more to be on the safe side. Perhaps superstition, but if are
+# running off a crystal, we can run closer to the limit. Note
+# that there can be a pretty wide band where things are more or less stable.
+adapter_khz 2000
+
+adapter_nsrst_delay 100
+if {[using_jtag]} {
+ jtag_ntrst_delay 100
+}
+
+reset_config srst_nogate
+
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}
+
+$_TARGETNAME configure -event examine-end {
+	# Enable debug during low power modes (uses more power)
+	# DBGMCU_CR |= DBG_STANDBY | DBG_STOP | DBG_SLEEP
+	mmw 0xE0042004 0x00000007 0
+
+	# Stop watchdog counters during halt
+	# DBGMCU_APB1_FZ |= DBG_IWDG_STOP | DBG_WWDG_STOP
+	mmw 0xE0042008 0x00001800 0
+}
+
+$_TARGETNAME configure -event trace-config {
+	# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
+	# change this value accordingly to configure trace pins
+	# assignment
+	mmw 0xE0042004 0x00000020 0
+}
+
+$_TARGETNAME configure -event reset-init {
+	# Configure PLL to boost clock to HSI x 4 (64 MHz)
+	mww 0x40023804 0x08012008   ;# RCC_PLLCFGR 16 Mhz /8 (M) * 128 (N) /4(P)
+	mww 0x40023C00 0x00000102   ;# FLASH_ACR = PRFTBE | 2(Latency)
+	mmw 0x40023800 0x01000000 0 ;# RCC_CR |= PLLON
+	sleep 10                    ;# Wait for PLL to lock
+	mmw 0x40023808 0x00001000 0 ;# RCC_CFGR |= RCC_CFGR_PPRE1_DIV2
+	mmw 0x40023808 0x00000002 0 ;# RCC_CFGR |= RCC_CFGR_SW_PLL
+
+	# Boost JTAG frequency
+	adapter_khz 4000
+}
+
+$_TARGETNAME configure -event reset-start {
+	# Reduce speed since CPU speed will slow down to 16MHz with the reset
+	adapter_khz 2000
+}
diff --git a/swo.sh b/swo.sh
new file mode 100755
index 0000000000000000000000000000000000000000..3d11fe628d8d6f71a40e3a36ebf6ab094bcf9c3a
--- /dev/null
+++ b/swo.sh
@@ -0,0 +1,6 @@
+#!/bin/bash
+clear
+echo "reset swo.log"
+>| swo.log
+
+tail -f swo.log