Commit d25e6978 authored by Per's avatar Per

bare9, are we done yet?

parent dd94f406
// now you are on your own.....
//
// look at the examples in the f4 crate
// https://github.com/jsjolund/f4
//
// try out the examples/pwm-control.rs
//
// connect an oschillocope to the pwm output
// check that you can control the pwm over the serial
//
//
// your assingment is to improve the user interface
// to take commands
//
// on // turn on the pwm output
// off // turn off the pwm output
// set p // p being the duty cycle in %
//
// and optionally
// freq f // pww frequency te f hz
// ... // your own commands
//
// I would suggest using the bare8 as a starting point
// and adding code from the pwm-control example
// you may look if `parse` can be of use to you here...
// make the command parser work first, and then add the pwm code.
//
//
// commit your solution (bare9)
//
// https://play.rust-lang.org/,
// offers a good way to prototype and share code snippets
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment